- Type: density sensor
- Car Make: all
- Place of Origin: Beijing, China (Mainland)
- Brand Name: Navipro
- Model Number: DM300
- Warranty: 1 Years
- Type:: density sensor car
- Measurement Range:: 0-2g/m³
- Resolution:: 0.005 g/m³
- Power Supply :: 12VDC~24VDC
- Output Signal:: 4-20mA and RS485
- Accuracy:: ±0.5%FS
- working temperature:: c
- Storage temperature:: -40-+105℃
- Protection Level:: IP65
- Certificate:: CE
Packaging & Delivery
|Packaging Details:||standard carton package|
|Delivery Detail:||5 days|
DM300 High Resolution Liquid Gravity Sensor 4-20ma and RS485
The density meter is applicable to test liquid density meter. It outputs 4~20ma and RS485 which can be read/write by user device, such as computer, controller and etc.
|Power Supply :||12VDC~24VDC|
|Output Signal:||4-20mA and RS485|
|Material :||Stainless steel|
The default baudrate is 9600bps,one start bit,eight data bit,one stop bit,no checksum bit.
The default id is 00 for the density meter. The range for ID is 00~FF (hex).
Send from computer: $ASSDD!
$A is the command header, SS is the sensor current ID. DD is the ID to be set for the sensor. ! is the
end. No <CR> in the command.
Sensor reply: #ADD<CR>
#A is the command header, DD is the new ID of the sensor.
Send from computer: $DAA!
$D is the command header. AA is the id of the sensor. ! is the end. No <CR> in the command.
Sensor reply: #DAAXX.XXX<CR>
#D is the command header, AA is the id of the sensor. XX.XXX is the density value in g/cm3.
Test Tool :
Limited One Year Warranty